March 9, 2005: Making ends meet (my wife wishes she could use hydraulic jacks and fork lifts to deal with family budget issues).

Closing the last gap (maybe last gasp?). Yesterday PBC and their iron workers closed the final gap linking the west and east decks. Peo and his team coaxed the two platforms into perfect alignment so that the splice plate could be pinned and bolted. Shown here is driving the first drift pin into the vertical splice plate linking the center edge girder with the south 216 edge girder.

It was windy - really very windy. I discovered that the virtue of an 8 lane wide roadway is that when the wind blows your glasses - it takes a long time to cover the width of the road and disappear. Fortunately I quickly retrieved them. But in spite of the wind, the work continued.

I soon discovered some of the tricks these guys use to encourage the two decks to behave and align themselves. Two major tools:

  • Altering the horizontal alignment with hydraulic jacks (located at the pylon).
  • Altering the vertical alignment with counterweights. In this case, the counterweights were mobile - consisting of fork lifts that moved toward or away from the gap, with or without counterweights.
I would not have thought changing the alignment a few inches would be so involved - and yet relatively straight forward. It was a joy to watch this team do their magic!. Today they are completing bolting up the vertical splice plates and horizontal splice plates.posted at: 10:00